Track light installation method How to wire the track light

Everyone knows the importance of lighting when decorating, and different lighting can bring different effects. In recent years, track lights have been favored by many people, and if they are used at home, they can enhance the atmosphere. Then, after buying back, do you know how to install it? What should I do when wiring? Let's take a look at the installation method of the track lights with the small series, how to wire the track lights. (Recommended reading: What are the benefits of installing track lights )

First, the track light installation method

1. The track spotlight installation comprises a track, a lamp holder mounted on the track, a lamp head fixed on the lamp holder, a lamp mounted in the lamp holder, and two conductive sheets disposed at the top of the track at the bottom of the track. There is a long groove-shaped groove.

2. The top of the lamp holder is a top plate, and the top of the top plate is provided with two elastic terminals protruding from each other.

3. The top plate of the lamp holder is placed in the track, and the two elastic terminals of the top plate are respectively in contact with the two conductive sheets in the track. The utility model can directly embed the lamp holder in the track, so that the lamp holder can be moved laterally to adjust the position of the light projection, and has smaller volume, less power consumption, luminous effect, convenient adjustment and moving position than the conventional illumination.

Second, how to wire the track lights

When wiring the track light, just connect the line on the transformer to the transformer and the power line. The point is the wiring of the electronic transformer. In principle, there are four wires on the electronic transformer, in which the front two wires are connected to the two lamps, and the two wires at the end are connected to the power cable. After the connection is completed, the power is turned on and the lamp lights up.

Third, the track spotlight installation precautions

Place the spotlights in the appropriate place on the track, pay attention to the track and the adapter of the lamp, and the three-circuit track with three-circuit feeder/single-circuit track with single-circuit feeder. When the track and the adapter are fitted, there is a certain directionality: the three-circuit track has a groove, and the corresponding connector has a bump, and the joint is paid attention to during the installation, and the position of the projection target is installed after the spotlight is installed. Adjust the horizontal and vertical angles of the lamps to ensure that the spotlights can project the objects effectively and efficiently.

The above is related to the installation method of the track lights, I hope to be helpful to everyone! Qi installed network, China's well-known large-scale decoration platform, decoration leading brand. If you want to make a new design, you are advised to apply for the free design service of the net, and help you plan a reasonable space layout and exquisite design through the professional designer's on-site measurement room.

>> Click here for professional designer free room design

Disclaimer: We have used all means to find the source of the picture or content. We have not found the relevant right holder. Please ignore the negligence. If the relevant rights holders see it, please contact us in time. We will delete and proceed as soon as possible. Handle it properly.